City 130 ExnRIIT6X LED lamp with explosion protection

Manufacturer: LedFocus

Description

City 130 ExnRIIT6X LED lamp with explosion protection

Lighting characteristics

14000: Luminous flux with clear glass, lm

D: Type of intensity curve

5000: Color temperature, К

70: Color rendering Index, Ra

108: Efficiency of the lamp, lm/W

Nichia (Japan): Manufacturer of the LEDs

P: Class of lighting distribution

120: Angle of emitting 2O 0,5, degree

Electrical specifications

130: Power consumption in nominal mode, W

170-264: Voltage of supplying network, V

0,59: Current consumption, not more than, A

5-6,5: The diameter of the power cable, mm

>0,95: Power factor

ExnRIIT6X: Marking of explosion proof

DIP A21 TA 80` C: Marking of protection against ignition of combustible dust

800: The function of protection against voltage surges up to, V

yes: The function of protection against overheating

50-60: Operating frequency range, Hz

I: Class of protection against electric shock

A: Energy efficiency class

ultralow: Emission of harmonic components to the network/ether

General characteristics

from -60 to +45: Range of working temperatures, С`

67: The degree of protection against external influences, IP

UHL 1: Type of climatic version

anodized aluminum: Housing material

optical polycarbonate: Material of protection glass

36: Warranty period, months

Weight

8,1: With console mount, kg

7: With a ceiling mount, kg

8,4: With mounting on bracket, kg

7,6: With mounting on cable, kg

Sizes

820х174х152: Without the package, with console mount, mm

820х205х87: Without the package, with ceiling mount, mm

820х174х152: Without the package, with mounting on bracket, mm

820х205х87: Without the package, mounting on cable, mm

City 130 lamp with explosion protection is designed to illuminate the objects with the level of explosion protection that does not exceed ExnRIIT6. Power consumption form the 220 V AC network is 130 W. It is replacement for mercury lamps. These lamps are important in places where energy saving and high reliability are required. Level of explosion protection is ExnRIIT6.

There is no stroboscopic effect, the light intensity does not vary over the entire range of supply voltages. Up time is less than 1 sec. City 130 are made on the basis of NICHIA LEDs. The LEDs have the light output of 120 lm/W. To increase the reliability the lamp is divided into electrically independent parts and has independent temperature control system. LED drivers have a patented electronic protection against over-voltage up to 800 volts.

Housing is made of aluminum profile, glass is made of shockproof polycarbonate. The lamp is mounted on any console, with the diameter of pipe of 65 mm. Mounting on cable, ceiling and for installation in suspended ceilings are available. Also lamps can be equipped with light sensor. These sensors provide automatic on / off of the lamp during sunset / sunrise. Функция датчика освещенности особенно актуальна для частных лиц, а также на линиях электропередач, на которых отсутствует линия для освещения.

Features of City lamps:

high level of lighting output;
quiet during operation;
no stroboscopic effect and vibration;
stability of the intensity over the whole range of supply voltages;
resistance to vibration and vandalism;
wide range of working temperatures ans supplying voltages;
instant start, even at deep subzero temperatures;
service life is more than 20 years.